POOL FILTER INSTALLATION 2 BAG AQUA MAX (BLACK)

Product Description

The Aqua Max 2 Bag Pool Filter Installation is a complete supply and installation service for pool owners in Gauteng East who need a practical replacement filter for a small to medium residential swimming pool. This service includes the black Aqua Max 2 Bag sand filter, selected filter media, old filter removal, standard installation labour, pipework adjustments and basic system testing.

This installation is suited to pools from 15,000 litres to 30,000 litres, provided the existing pump, pipework and pool system layout are suitable. It is intended for pool systems using a 0.37kW, 0.45kW or 0.60kW pool pump, with final suitability depending on the full setup on site.

The Aqua Max 2 Bag filter can be installed with silica sand, Eco Clear glass or Eco Fibre sponge media, giving the customer a choice of filter media based on their pool care preference. The original supplied service information includes old filter removal, old media removal, up to 2 metres of pipework adjustment, 50mm PVC fittings, Tangit solvent weld, unions, special adaptors for poly pipe where applicable, and final testing for leaks and operation.

This is a supply and installation package, not a supply only filter listing. The installation is based on using the existing filter position and existing suitable infrastructure. The new filter must be installed on a flat surface, and any additional plumbing, site preparation or repair work must be quoted separately before it is done.

FAQs

What is included in the Aqua Max 2 Bag filter installation?

This service includes the black Aqua Max 2 Bag filter, selected filter media, old filter removal where suitable, old media removal, standard labour, pipework adjustments up to 2 metres, fittings, unions and basic leak testing.

Is this a supply only product or a full installation service?

This is a full supply and installation service. The customer is buying the physical filter, the selected media and the standard installation work.

What pool size is this 2 Bag Aqua Max filter suitable for?

This updated listing is for pools from 15,000 litres to 30,000 litres, subject to the existing pump size, pipework, filter position and overall system condition.

What pump sizes can be used with this filter?

This listing is intended for pool systems using a 0.37kW, 0.45kW or 0.60kW pool pump. Correct pump and filter matching is important for filtration performance and warranty validity.

Can I choose the filter media?

Yes. The service allows the customer to choose between silica sand, Eco Clear glass or Eco Fibre sponge media.

Does the service include old filter removal?

Yes. Removal of the old above ground pool filter is included where site conditions allow safe and practical removal.

Does the service include old media removal?

Yes. The old filter media is removed before the existing filter is disconnected and replaced.

Does the installation include pipework?

Yes. Standard pipework adjustments up to 2 metres are included, along with 50mm PVC fittings and Tangit solvent weld where required.

Are unions included in the installation?

Yes. The supplied service information includes three unions, which help make future servicing or filter replacement easier.

Can this filter be fitted to poly pipe?

Yes, special adaptors are included where poly pipe is present, provided the rest of the installation setup is suitable.

Does this installation include electrical work?

No. This is a pool filter installation service. Electrical repairs, DB board changes, pump wiring problems and timer repairs are excluded unless quoted separately.

What is excluded from the standard installation?

The standard installation excludes major plumbing changes, DB board changes, timer replacement, electrical repairs, waste line changes, water supply changes, long pipe runs, pump room rebuilding, concrete work, pump replacement and repairs to faulty existing infrastructure.

How long does installation usually take?

Installation normally takes place within 2 to 3 working days after receipt of order, depending on scheduling and site readiness.

What warranty is included?

The installation workmanship is covered by a 1 year warranty. The tank carries a 2 year manufacturer defects warranty, and the multiport valve and fittings carry a 1 year warranty.

Service Inclusions

This installation service includes:

Supply of the black Aqua Max 2 Bag sand filter

Choice of filter media: silica sand, Eco Clear glass or Eco Fibre sponge media

Removal of the old above ground pool filter, where conditions allow

Removal of old filter media

Travel within the Gauteng East service area

Standard installation labour

Pipework adjustments up to 2 metres

50mm PVC fittings with Tangit solvent weld

Three unions for easier future maintenance

Special adaptors where poly pipe is present

Filling the new filter with the selected filter media

Final assembly and basic leak testing

Work Summary

The installation normally starts with a basic inspection of the existing filter setup, including the visible condition of the old filter, lid area, gasket, pipe connections and installation position.

The old filter media is removed first. The existing above ground filter is then disconnected from the pool plumbing and removed where site conditions allow.

The new Aqua Max 2 Bag sand filter is positioned in the same location where suitable. The filter must be placed on a flat surface.

The required fittings and unions are installed, and the filter is reconnected to the existing suction and return pipework.

The selected filter media is added to the new filter. The system is then closed, checked and tested for leaks and basic operation.

Exclusions

This standard installation does not include major plumbing changes, DB board changes, timer replacement, electrical fault repairs, waste line changes, water supply changes, long pipe runs beyond the included allowance, pump room rebuilding, concrete work, new pump installation unless specifically included, or repairs to faulty existing infrastructure.

This service also does not include moving the filter to a new position, preparing an unsuitable surface, repairing old leaking pipes, replacing a faulty pump, or correcting incorrect existing plumbing unless quoted separately.

Any extra work must be quoted separately before it is done.

Terms and Conditions

This installation service is available in Gauteng East.

Installation normally takes place within 2 to 3 working days after receipt of order, depending on scheduling and site readiness.

The installation area must be cleared and ready before the team arrives.

The installation is based on using the existing filter position, plumbing and pool system infrastructure, provided they are safe, suitable and in working condition.

The new filter is installed on a flat surface only.

This listing is intended for pools from 15,000 litres to 30,000 litres using a 0.37kW, 0.45kW or 0.60kW pool pump, subject to final site suitability.

Installations on plots and farms within Gauteng may carry a surcharge.

The installation workmanship is covered by a 1 year installation workmanship warranty.

The filter tank carries a 2 year manufacturer defects warranty.

The multiport valve and fittings carry a 1 year warranty.

Technical Specifications and Compatibility

Product Details

Product Name: Pool Filter Installation 2 Bag Aqua Max Black
Brand: Aqua Max
Product Type: Above ground swimming pool sand filter installation
Filter Size: 2 Bag
Colour: Black
Recommended Pool Size: 15,000L to 30,000L
Filter Media Options: Silica sand, Eco Clear glass or Eco Fibre sponge media
Installation Type: Supply and standard installation
Service Area: Gauteng East

Motor and Performance

This product is a pool filter, not a pool pump.

Recommended Pump Match: 0.37kW, 0.45kW or 0.60kW pool pump
Performance Note: Final filtration performance depends on the existing pump, pipework, media choice, pool volume, water condition and full pool system layout.

Electrical Details

No electrical specifications are supplied for this product because it is a filter installation service.

Electrical repairs, DB board changes, timer replacement and pump electrical faults are excluded unless quoted separately.

Plumbing and Build

Tank Type: Seamless one piece moulded polyethylene tank
Valve Type: Side mounted multiport valve
Pipework Included: Up to 2 metres of pipework adjustment
Fittings: 50mm PVC fittings with Tangit solvent weld
Unions Included: Three unions
Poly Pipe Adaptors: Included where applicable
Installation Surface: Flat surface only

Pool Compatibility

Pool Size Compatibility: 15,000L to 30,000L
Pump Compatibility: 0.37kW, 0.45kW or 0.60kW pool pump
Filter Media Compatibility: Silica sand, Eco Clear glass or Eco Fibre sponge media
Pool Surface Compatibility: This product is not limited to one pool surface in the supplied information. Final suitability depends on the existing pool system and installation setup.

Installation Conditions

Service Area: Gauteng East
Lead Time: Normally 2 to 3 working days after receipt of order
Site Preparation: Installation area must be cleared and ready
Surface Requirement: Flat surface only
Existing Infrastructure: Existing plumbing must be suitable and in working condition
Surcharge Note: Plots and farms within Gauteng may carry a surcharge
Installation Warranty: 1 year workmanship warranty
Product Warranty: 2 year manufacturer defects warranty on tank
Valve and Fittings Warranty: 1 year warranty on multiport valve and fittings

What’s in the Box

Physical Product Contents

Black Aqua Max 2 Bag sand filter

Side mounted multiport valve

Required standard fittings supplied with the installation

Selected filter media: silica sand, Eco Clear glass or Eco Fibre sponge media

Installation Service Contents

Old above ground filter removal where conditions allow

Old filter media removal

Professional standard installation

Up to 2 metres of pipework adjustment

Three unions

50mm PVC fittings

Tangit solvent weld

Special adaptors for poly pipe where applicable

Travel and labour within the Gauteng East service area

Final assembly and basic leak testing