POOL CLEANER ZODIAC REPLACEMENT DISC/SKIRT PEARL BLUE (ORIGINAL)

Product Description

The Zodiac Original Replacement Disc/Skirt Pearl Blue is a genuine replacement disc for compatible Zodiac suction pool cleaners. It is designed for models such as Pacer, G2, G3, Genius, G4 and G6.

The disc, also called a skirt, sits at the base of the cleaner and helps it maintain direct contact with the pool floor and walls. This contact is important because suction cleaners need a good seal against the pool surface to move, vacuum and cover the pool correctly.

This Zodiac replacement disc has a Pearl Blue finish and a 36 fin design. The fins help the cleaner glide over the pool surface while maintaining suction contact. If the disc is worn or damaged, the cleaner may struggle to move properly, lose contact with the surface, get stuck, miss sections of the pool or lose cleaning coverage.

In South African pools, cleaner discs work hard. Dust, leaves, fine grit, rough pool surfaces, sun exposure and regular pool cleaning cycles can all contribute to normal wear. A worn disc may look flattened, torn, curled, stiff or uneven around the edges. When this happens, replacing the disc can help restore cleaner movement and suction contact when the rest of the cleaner and suction system are in good condition.

The disc is designed for easy attachment to the cleaner’s Flexi Foot. It is recommended to inspect the Flexi Foot at the same time because these two parts often wear together. Replacing only the disc while the Flexi Foot is also worn may reduce the benefit of the repair.

This part does not increase pump suction. Suction comes from the pool pump and hydraulic system. However, the disc helps the cleaner use available suction properly by helping the cleaner stay flush against the pool surface.

FAQs

What is the Zodiac Original Replacement Disc/Skirt used for?

The Zodiac Original Replacement Disc/Skirt is fitted to the base of compatible Zodiac suction pool cleaners. It helps the cleaner maintain surface contact, seal against the pool floor and walls, and move correctly during cleaning.

Which Zodiac models are compatible with this disc?

The supplied product information lists compatibility with Pacer, G2, G3, Genius, G4 and G6 Zodiac pool cleaners.

What are the signs that the disc needs replacing?

Replace the disc if it is torn, cracked, worn flat, curled, stiff, warped or missing fins. You may also notice the cleaner sticking, moving poorly, losing wall contact, missing areas of the pool or not covering its usual cleaning radius.

Does the replacement disc improve suction?

It does not increase pump suction. It helps the cleaner maintain better contact with the pool surface so the cleaner can use available suction correctly.

Can a worn disc stop the cleaner from moving properly?

Yes. If the disc is worn or torn, the cleaner can lose its seal against the pool surface. This can cause poor movement, poor suction contact and reduced cleaning coverage.

Does this disc help with wall climbing?

It can support wall climbing by helping the cleaner maintain contact with the surface. Wall climbing also depends on suction strength, hose condition, diaphragm condition, Flexi Foot condition, pool surface and overall cleaner setup.

Should I replace the Flexi Foot with the disc?

It is recommended to inspect the Flexi Foot when replacing the disc. These parts often wear at the same time. If the Flexi Foot is cracked, hard, worn or distorted, replacing both can help restore more consistent cleaner movement.

Is this disc suitable for all pool surfaces?

The supplied information states that the disc is designed for use across various pool environments. Pool surface performance depends on the cleaner model, suction flow, disc condition, Flexi Foot condition and pool finish.

How is the disc installed?

Turn off the pump, remove the old disc, clean the suction port area and fit the new disc with the grooved side facing the cleaner body. Push it firmly onto the suction port until it clicks into place.

How should I maintain the disc?

Inspect the disc regularly for wear and damage. Clean it with a soft brush and water when needed. Store replacement discs in a cool, dry place away from direct sunlight.

Is this disc sold individually?

The supplied product information describes this as a replacement disc/skirt. Unless your store pack says otherwise, list it as a single replacement disc.

Key Features & Benefits

• Original Zodiac replacement disc/skirt
• Pearl Blue colour
• 36 fin design
• Fits Pacer, G2, G3, Genius, G4 and G6 cleaners
• Helps maintain cleaner contact with the pool surface
• Supports suction cleaner movement and coverage
• Helps the cleaner stay flush against the pool floor and walls
• Useful when the old disc is torn, worn or stiff
• Easy to fit onto the cleaner’s Flexi Foot
• Helps restore cleaning performance when the old disc is damaged
• Practical maintenance part for Zodiac suction cleaners
• Helps extend the working life of a compatible cleaner
• Recommended to inspect the Flexi Foot at the same time

Real World Applications / Ideal For

• Zodiac Pacer cleaners with worn skirts
• Zodiac G2, G3, G4 and G6 pool cleaner maintenance
• Zodiac Genius suction cleaner repairs
• Cleaners that no longer move smoothly
• Cleaners that lose suction contact with the pool surface
• Cleaners missing sections of the pool
• Pool owners replacing worn contact parts
• South African pools affected by dust, grit, leaves and rough debris
• Fibreglass, concrete, tiled, vinyl and marbelite style pools where the compatible cleaner is suitable
• Pool shops and technicians servicing Zodiac suction cleaners
• Replacing a torn or curled cleaner disc before it affects movement further

Technical Specifications

Specification	Details
Product Type	Pool cleaner replacement disc/skirt
Product Name	Zodiac Original Replacement Disc/Skirt Pearl Blue
Brand	Zodiac
Colour	Pearl Blue
Compatible Models	Pacer, G2, G3, Genius, G4 and G6
Fin Design	36 fins
Function	Surface contact, suction seal and movement support
Cleaner Type	Suction pool cleaner spare
Installation Point	Fits onto cleaner Flexi Foot / suction port area
Pool Surface Compatibility	Depends on compatible cleaner setup and pool surface
Sold As	Replacement disc/skirt
Warranty	Not supplied

Installation / Usage Notes

• Turn off the pool pump before working on the cleaner.
• Remove the cleaner from the pool.
• Pull the old disc off the suction port area.
• Clean the fitting area before installing the new disc.
• Fit the disc with the grooved side facing the cleaner body.
• Push the disc firmly onto the suction port until it clicks into place.
• Check that the disc sits evenly and is not folded or twisted.
• Inspect the Flexi Foot at the same time and replace it if worn.
• Turn the pump back on once the disc is fitted.
• Check that the cleaner moves freely in the pool.
• Inspect the disc regularly for wear, tears or damage.
• Clean the disc with a soft brush and water if debris builds up.
• Store spare discs in a cool, dry place away from direct sunlight.

Conclusion

The Zodiac Original Replacement Disc/Skirt Pearl Blue is an important replacement part for compatible Zodiac suction pool cleaners. If your Pacer, G2, G3, Genius, G4 or G6 cleaner is losing surface contact, moving poorly or no longer covering the pool properly, the disc may be worn and ready for replacement. Inspect the Flexi Foot at the same time for the best repair result.